Mobula 8 frame

Replacement frame for mobula8.

This frame is not bulletproof, but should take decent hits without braking instantly.

I've made few modifications to stiffen up the frame. Weight is around 17g (original 11g), so sligthly heavier than original, but with 550mah 2s lipo i've had around 5mins of flight time.

I used M3 x 10mm countesunk bolts to mount the fc, shortened the silicon rubber gromits a bit and made threads for the canopy.

Printed with PLA+ filament 

100% infill

4 walls

use supports