DJI Action weighted dummy

Insert quarters and add some e6000.

6 U.S. quarters = 34.02g

real DJI Action  = 56g

you need  an addition 21.98~ g

change your infill settings in your slicer (without supports or brim) until and slice until you get a ‘filament used’ weight close to 21.98.

my infill was about 40%.

If you're really particular and are trying to find a gram or two extra add a few extra perimeters in your settings.

then turn on supports and print.

It's just a square so you can print it pretty fast and I printed mine at 200+mm/s