Original Prusa Enclosure Hex Cover

In the process of trying to get my enclosure as air tight as possible, I designed this simple and quick cover for the hexagonal cutout in the back panel. 

All you need are 

• 4x M3 nuts
• 4x M3x12 or longer bolts
• Thin weatherstripping of your choice (e.g. 1.5 x 6 mm)

Then press in the four M3 nuts into the plate using pliars or similar tools

On the face of the cover there is an outline of where the cutout is located.  Just cut your strips to length and apply along these lines.  

Here is the one I used: https://www.amazon.de/Dichtungsband-Selbstklebend-Fensterdichtung-Gummidichtung-Anti-Kollision/dp/B0B6C2WK7H/

I also used this along the frame to seal all the plastic panels to ensure no air escape.