nozzle brush for Prusa XL 3mm brushes

printing instructions 

filiment PETG (or other high temp filiment)

infill no great matter what

0.4 nozzle probably best

concept

the idea behined this is to solve the nozzle jaming problem i have found common with the prusa xl this is due to one of two problems in most cases poor bed adheasion or filiment build up on the nozzle this solves that by doing what it says on the tin wipping the nozzle it takes a 3mm wire brush as linked bellow it also uses one threaded  m3 insert the hole for which is 4.4mm wide it prints in about 20minutes per part 

 https://www.amazon.co.uk/sourcing-map-Plated-Crimped-2-35mm/dp/B081MSK6L4/ref=sr_1_49?crid=3CPFORK32NU3O&dib=eyJ2IjoiMSJ9.GLcwWFqecgF-DaKu8N-1MOFwSHJBHMskrloqhPTEonUcFA-3i49uuQMDvAoXTJ6lAtQK4dqKB5CMWqNyxYD7wQRpItguMDN0HhTTvRhYmYKzAA-kVktE3sMylXwo1dhimm4nVCMFohpxlLSZweitzXynqUmH8XtE5DU3jzoXRBxwKeVdMUjg1NUbFEZ39qDlK-_ervh2eqlpxaBZQWYrFXrxmFyhfKYJ69NE3AT_SP5nQqBtGjdqp4kOW1WayyQrvuhjczs-lnoI08s6OnCtft17RunZRJB1kiUoa0J_E2g.nbZ7xWCRgHlUffNHw5X9l2Efucmyk9I8RcrY4nd3zmQ&dib_tag=se&keywords=3mm+wire+brush+source+map&nsdOptOutParam=true&qid=1729896389&sprefix=3mm+wire+brush+source+map%2Caps%2C122&sr=8-49 

    while this bares some resemblance to https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu it is not based on it atleast directly i did attempt to make it cross compatible once i discovered it but moddled the whole thing in fusion from scratch.