October 25, 2024
Description
The goldfish plants that Hoozuki cultivates in Hoozuki no Reitetsu.
The FishBodyScreaming/ClosedMouth fit a 6mm wooden dowel. If you scale the prints smaller (see the small fish in the bouquet) then just drill holes into the bottoms of the bodies and glue in the appropriately sized wooden dowels. LeftFin/RightFin glue into pockets ont he Body sides.
The Tail prints vertically without supports and fits into the slot in the back of the fish. Use a heat gun to soften the tail and bend it into a soft arch with waves. Trim the sharp corners of the tail using scissors. If you are having trouble trimming the tail into shape, use the heat gun to soften the plastic first.
The Sepal and Leaf print flat. Use a heat gun or hair dryer to shape the flat pieces to fit around and on the wooden dowel.
The PenEnd has a hole that fits a 7.5mm pen top.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
ICosplayInsanity
