ROG ALLY JIG

Description

This is a jig I made for the ROG ALLY Z1 which is based off of my previous steam deck repair jig (https://www.printables.com/model/545326-steam-deck-repair-jig)

There are 3 models, a “Right and Left” pair for smaller printers with locking tabs and a “Combine” file for larger printers which is printed in one piece.

I did not add any curves on the face of this one as I found it was just wasted material and could possibly scratch the surface.   Instead I suggest adding a small piece of padding on both sides bottom corners (foam tape) which is soft and around 1mm thick.  That adds more stability (if needed) will protect the faceplate of the ALLY.

This should also work with the ALLY X but as I do not have one, I cannot test fit it.

If anyone wants to donate one to me, I will be happy to make sure everything fits ;)