Fanttiik NEX E1 Max Holder for Multiboard

A simple holder for the Fanttik NEX E1 Max electric screwdriver. It attaches to a Multiboard using a Multiboard Weight-Bearing Directional Snap. With this type of snap, you need to insert it into the board at an angle, starting from the top. The screwdriver does have some weight, so I wanted to ensure the connection to the board was strong without needing to require multiple snaps or bolt-locking or anything too complicated.

Printing

• Print in default / normal orientation (bottom on the bed)
• 0.2mm layer height
• 2 walls
• 15% infill
• Build plate only supports. I used default tree support settings. The supports only required about 1g of extra filament, and they removed easily.

Multiboard License