Case for OLIMEX TMS320-XDS100

Hi,

this is a commissioned model for my workmates from our electronics testing department.
A nice case for their JTAG programmer pcb (OLIMEX TMS320-XDS100 v3+ JTAG Programmer).

It is a two part case for use with 8x M3 inserts. The input is from PC >> USB-cable >> USB connector on the pcb. The output is then pcb >> cable work >> DSUB15 connector and 4 mm  bananna plugs (power connection) >> testing jig. 

my print settings:

- filament = M4P ESD PLA (black)
- 0,25 mm layer height @ 0,4 nozzle
- 3 perimeters
- 5-10% gyroid infill
- solid layer: 3 top & bot
- supports: yes, see pictures
- print orientation as in the pictures

Print time total: about 3h for me on my MK4.

The grey print was my final prototype. The color change was not indented. I ran out of grey filament. The black print is our final production model with esd safe material.
On the bottom are 4 small indentations. These are placeholders for 5mm rubber feets. 
One of the domes is chamfered a bit because of 2 close THT pins on the pcb.

Update 13.11.2024

• added 3 pictures of the internal cabling

Happy printing!