Amiga 500 switchpanel for the A500 case from A1200.net

Since I didn't want to drill holes in the beautiful case from A1200.net, I designed a small panel that fits directly into the expansion opening of the case.

I use several switchable extensions and an RGB2HDMI mod in the Amiga.

Holes would have to be drilled in the housing for everything, which I wanted to avoid at all costs.

It has become a panel for 3 switches, a mini-HMDI output and a button.

The model consists of two parts (panel and rear attachment).

The two parts can be screwed together. To do this, a 2mm melting thread must be inserted into the panel, and the whole thing must then be screwed together with an M2x10 or M2x12 screw.

The following switches, buttons and HDMI socket are used:

1x CLDIY ON/ON DPDT 6mm

2x TSSM1022A1

1x HDMI socket

1x button (6mm version, the contacts on one side of the button must be removed.)

For the small switches, the protrusions on the plastic housing should be removed to make them fit.

At the end, the whole structure can be fastened in the A500-case with an M3 screw.

have fun with it. :)

Print Settings

Printer:

Prusa MK3S+

Rafts: 

No

Supports:

Yes

Resolution: 

.15 or .2

Infill:

15%

Filament:

PETG, PLA, whatever you prefer

Category: Retro Computer, Commodore