DJI Goggles 3 Case

DJI Goggles 3 case. 

I designed this case to house the goggles with the battery pack flipped and nested on the inside of the goggles. The goggles fit snugly in the case and there's no perceivable movement inside the case when shaken. Despite this I would still highly recommended that you have a protective cover over your lenses to prevent damage. 

I designed the latch to be printed separately from the lid so it can be printed in a different orientation to increase durability. This also means you can replace it if the latching action becomes loose over time due to wear. If you would like to attach the latch without extra hardware, you can add the latch as a part to the lid via your slicer software. 

There's an access hole on the bottom of the case in case you would like to charge the goggles while they're in the case. I have a magnetic USB C cable end on mine that makes this easier for me.

Aside from filament, you'll need:

M3*4 x2 - for the latch

M3*20 x2 - for the hinges

M3 brass insert x4