Raspberry Pi 3(2) OctoPi Case for Prusa i3 MK3 with Cam-Cable-Spool

After some Prototypes i've desided to make new case for my Prusa MK3's Raspberry OctoPi with an integrated Cablespool for the flatcable of the Pi camera. It can be pluged in the 3030 Extrustion left beside the Displaycase of the MK3.
You need a 75-100cm Raspberry Pi flatcable for the Spool. The Cammount is modified with a new Cover with Cableduct. The Shaft is now prepaired to hold a nut and the cableholder is modified to guide the cable a bit better.

I've used as Basecase the Case from hackoholic and his Cammount.

Update 30.03.2018
I've added a Version to mount the Pi on the right front side of the MK3. The Object's are mirrored and modified but not printed and tested ! Please give Feedback

NOT FOR MK3S !

Print instructions

Category: 3D Printer Parts Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.20

Infill: 20%

Notes:

I've uses Supports for the Basecase in the Spoolcase.

Post-Printing