October 28, 2024
Description
All models are pre-oriented for ease of use.
I highly recommend printing the PokeStop Complete file. I optimized the design to print all at once, as it will be assembled, on a common 235mm². It's simplest and easiest this way, in my opinion. The individual files for each piece are also available and are cross referenced with the names of the files on a photo of the finished model, included above.
The holes are designed to be 6mm in diameter, which is compatible with these acrylic rods I got through Amazon (non affiliate link). Depending on how well tuned your printer is and the material you use, it may be a perfect friction fit like I had with my orange print. My light blue print ended up being a touch loose, so the components were able to slide up and down on the rod, so I used small, clear zip ties to hold them at the right height on the rod and allow the pieces to spin. Feel free to experiment with other ways of keeping the pieces in place! :)
PokeStop Complete
~130g of filament at 10% infill, and dimensions of roughly 210/215/10mm.
I'm very happy with how this model turned out but everything can be improved in some way, so If you have any ideas or suggestions, please let me know! And I'd love to see any Makes you create!
Enjoy!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Pulse1147
