Prusa MK4s fan mod for MK3s original toolhead - Remix Parts for better fitting

Thx a lot for this great project.

The cut at the extruder cover and the hole at the fan shroud for the heatinsert was to small.

The arm from the fan case cover is al little bit longer and has a longhole for the screw.

And i have created a cable clamb for the fan cable.

You could use one of the following 5V Fans.

 https://de.aliexpress.com/item/1005002219540577.html?spm=a2g0o.order_list.order_list_main.10.11585c5fbDf0Ji&gatewayAdapt=glo2deu

 https://de.aliexpress.com/item/1005005075484035.html?spm=a2g0o.order_list.order_list_main.130.17d15c5fKFSHSX&gatewayAdapt=glo2deu

I printed all parts in PC with default values. 

0.2mm and 15-20% infill

Now i published the V2 of the printable files. Thx @Molot for the comments.