DJI Neo Adventure Command Center — transport box, storage crate — PRO version
Iconic FABNovember 8, 2024
Description
About DJI Neo Adventure Command Center — PRO
Meet the DJI Neo Adventure Command Center: a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This impact-resistant storage crate doesn't just carry your DJI Neo – it safeguards your entire aerial arsenal.
The PRO version includes some nice extras compared to the Free version:
- Carrying handle
- Additional accessory pocket
- Choice between flat and helipad style top lids
From spare batteries to essential tools, every component finds its home in precise compartments, ensuring your gear stays mission-ready for any adventure.
Whether you're scaling mountains, crossing deserts, or navigating urban environments, this fortress keeps your investment protected against the elements. Custom-designed with ease of use in mind, it transforms from secure transport to a mobile workstation in seconds.
Don't just store your drone – elevate your entire experience with a case that's as sophisticated as the technology it carries.
Bill of Materials and Sourcing guide
| Part | Size / Standard | QTY | Source |
| M3 bolts (for hinges and latches) | M3x40 SHCS | 6 | Buy here |
| M3 bolts (for carrying handle) | M3x16 SCHS | 2 | Buy here |
| M3 nuts (for carrying handle) | M3 | 2 | Buy here |
| M3 threaded heat set inserts (for accessory pocket) — M3 * OD:5 * Length: 4mm ! | M3x5x4 | 2 | Buy here |
Printed Parts
| Parts | QTY |
| DJI Neo Adventure Command Center PRO — printed parts | 10 |
Video showcase
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3d printing process | FDM (fused deposition modeling) |
| Infill type | Support cubic, Honeycomb [1] or Grid |
| Material | PLA, PLA-CF, ASA, ASA-CF, ABS, ABS+, ABS-CF |
| Infill percentage | 25% - 40% [1] |
| Layer height | Recommended: 0.2mm |
| Wall count | Recommended: 4 |
| Solid top/bottom layers | Recommended: 5 |
| Extrusion width | Forced 0.4mm |
Side notes to the print guidelines
[1] To ensure reasonable combination of print speed, filament usage and structural integrity of the parts slice all parts with Support cubic infill with 25% percentage. Honeycomb or Grid infill with 40% infill percentage is highly recommended for Latches and Handle.
A wall count of 4 is an absolute must to ensure the structural integrity and long life span of the parts.
File naming convention
Printed parts use this naming convention:
| Primary color | These files will have nothing at the start of the filename. Example: lid_x1.stl |
| Accent color | Files have “[a]” to the front of any STL file that is intended to be printed with accent color. Example: [a]_seal_x1.stl |
| Count of parts | Files have “x1” to “x2” at the end of any STL file. The number represents the count of identical parts to be printed. Example: latch_x2 (In this case you will need to print 2 identical parts). |
Change log
| Date | Changes |
| 29.10.2024 | Initial version (Rev1) |
