October 30, 2024
Description
The holes for the PCB are 15mm apart and have a diameter of 2.9mm so that they threat in. The screws to mount it can be M3*6mm without poking through the other side. The soldering joints are also hanging over the mount and shouldn't cause any issues.
The mount comes in two versions where the center of the screws are either up to 30mm or 50mm apart. The long hole has a width of 3mm and needs to be screwed tightly to the 3d printer. I used additionally some washers.
License:
Creative Commons — Attribution — Noncommercial
7
BananaJuice
