June 22, 2025
Description
---------------------------------------------------------------------------------------------------------
Important Notice: This model and the contents below are exclusive to Printables.com. Any remixes or original copies found on other sites are NOT uploaded by me and are guaranteed to be fraudulent or become outdated at any time. If you wish to upload this model to other sites, you must include an explicit written proof of authorisation from myself. This is mandatory. This also ensures everyone can download the up-to-date model as I will continue improving them here.
Please help report this thief and keep the community safe! Thank you!
---------------------------------------------------------------------------------------------------------
It has been a long few weeks since I started working on this project, and I'm excited to finally release it!
As some of you product designing/3D printing enthusiasts might have guessed, this concept was heavily influenced by one of the greatest industrial designers - Dieter Rams and the Standby Dock, created by Scott Yu-Jan, one of my favourite product designers on YouTube, in collaboration with OVERWERK.
THIS IS BY NO MEANS A REMIX OF SCOTT'S OR DIETER'S MODEL.
After a few iterations of the design, experimenting with potential features while balancing the overall design language and functionality, we have arrived at this version, ready to be used for the first time. This is by no means the final version as there's always room to improve and I'm constantly having new ideas to experiment with. But after some delay to the original schedule, I've set a release deadline for myself so everyone can enjoy it!
So, if you would like to stay tuned for future updates on the dock, please follow me here!
This is the v3. It carries the familiar look of the DN40 clock, with a few facelifts to fit the design criteria.
In Scott's dock, the iPhone takes up very little space at the face of the dock, although the push eject feature is a genius move, the placement had to be shifted significantly to fit the thicker dimension of the charger. Therefore, this entire dock was sketched from the ground up.
This version comes with 4 different battery storage systems: 300, 550, Hybrid and Openback. Their details are as follows:
As for a built-in 2s slots version, it will be coming on the next update. Since the WhoopStor and the ToothStor share the same housing, you're also encouraged to design your own compartments to fit the batteries you currently own.
Gridfinity models are also included as requested by testers
Finally, I would like to thank you for your interest in this project! If you appreciate these types of projects I work on for the community, you can support me here:
Payme (Hong Kong and Macau)
| 300 | 500 | Hybrid | Openback | |
| Basic | ✔ | ✔ | ✔ | ✔ |
| Gridfinity | ✔ | ✔ | ✔ | ✔ |
| Special Editions | ||||
| 90%er | ✔ | |||
| Infinity Loops | ✔ | |||
| Fractal | ✔ | |||
| FlipsterFPV | ✔ | |||
| spectrexFPV | ✔ | |||
| weBLEEDfpv | ✔ | |||
| SCHIZO FPV | ✔ |
The sizing of the compartments is as follows:
[X] x [Y], while
[X=1] is the total length of the Openback
[Y=1] is the total width of the Openback
If [X] and/or [Y] are not a unit fraction, i.e. 0.75 and 0.66, you'll need to do some primary school maths to make them whole.
However, if it's a unit fraction (i.e. 1/x, 1 as the numerator), a whole number is used
Examples:
Four “[1x4]” used
Top: [0.66x0.66], [3x0.66]
Bottom: [1x3]
this might be confusing to get used to, but it's easier for future customisations I promise.
From the feedback gathered at Infinity Loops, the Openback option was a highly requested feature. I've already created a few parametrically designed compartments.
If there's a specific compartment design you would like to get made, please don't hesitate to DM me.
Any Openback compartments MUST fit inside the dimensions as shown below:
The Dock is open for customisation requests (NOT REMIX), please kindly DM me here on Printables or Discord.
(Left, Right or Both)
The rail system allows for module expansions. Please see the images below for the dimensions. [Max allowed rail length for modules: 86.14mm]
Cross-sectional view
symmetrical at 25.00mm from dock's bottom
Locking Bump
⌀ 1.00mm;
10.00mm from centre to rail end
(Left, Right or Through)
Holds extra stuff. Fits 2-3s Li-Ion packs - notably Auline 4800mAh 3s.
For any imprint customisations, please DM me here on Printables or Discord using the following format. Supported file types: Graphics: DXF/DWG; Texts: TTF/OTF
location: [filename]/[text]
back: Tattu_logo.png
left: 90%er fill
location naming reference:
It goes without saying that there are lots of ideas for new features waiting to be experimented. I've got a list of them, however, if you would like one tailor-made, please don't hesitate to DM me.
Equilateral Triangular Prism: 51.00*110mm; Fillet (exclude top edge) radius: 4mm
If you appreciate these types of projects I work on for the community, you can support me here:
Payme (Hong Kong, Macau and PRC)
License:
Standard Digital File License
7
spectrexFPV
