November 15, 2024
Description
Introducing the DJI Neo Adventure Command Center: a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your DJI Neo but also shields your complete aerial toolkit.
From spare batteries to essential tools, every component finds its home in precise compartments, ensuring your gear stays mission-ready for any adventure.
Whether you're conquering peaks, traversing wastelands, or exploring cityscapes, this bastion safeguards your gear against the harshest conditions. Engineered with user-friendliness as a priority, it effortlessly converts from secure storage to a portable command center in moments.
Don't just store your drone – elevate your entire experience with a case that's as sophisticated as the technology it carries.
Discover the DJI Neo Adventure Command Center — PRO version, engineered for the most discerning drone enthusiasts. Upgrade to the PRO version and unlock exclusive features:
- Convenient carrying handle for effortless transport
- Additional accessory pocket for expanded storage
- Versatile top lids with flat and helipad style options
| Part | Size / Standard | QTY | Source |
| M3 bolts (for hinges and latches) | M3x40 SHCS | 6 | Buy here |
| M3 bolts (for handle) | M3x20 SHCS | 2 | Buy here |
| M3 nuts (for handle) | M3 | 2 | Buy here |
| Parts | QTY |
| DJI Neo Adventure Command Center — printed parts | 6 |
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3d printing process | FDM (fused deposition modeling) |
| Infill type | Support cubic, Honeycomb [1] or Grid |
| Material | PLA, PLA-CF, ASA, ASA-CF, ABS, ABS+, ABS-CF |
| Infill percentage | 25% - 40% [1] |
| Layer height | Recommended: 0.2mm |
| Wall count | Recommended: 4 |
| Solid top/bottom layers | Recommended: 5 |
| Extrusion width | Forced 0.4mm |
[1] To ensure reasonable combination of print speed, filament usage and structural integrity of the parts slice all parts with Support cubic infill with 25% percentage. Honeycomb or Grid infill with 40% infill percentage is highly recommended for Latches.
A wall count of 4 is an absolute must to ensure the structural integrity and long life span of the parts.
Printed parts use this naming convention:
| Primary color | These files will have nothing at the start of the filename. Example: lid_x1.stl |
| Accent color | Files have “[a]” to the front of any STL file that is intended to be printed with accent color. Example: [a]_seal_x1.stl |
| Count of parts | Files have “x1” to “x2” at the end of any STL file. The number represents the count of identical parts to be printed. Example: latch_x2 (In this case you will need to print 2 identical parts). |
| Date | Changes |
| 15.11.2024 | Updated BOM and sourcing guide chapter |
| 29.10.2024 | Initial version (Rev1) |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Iconic FAB
