Elgato Stream Deck Button Box Mount for Thrustmaster T300RS

This is a printable mount for the Thurstmaster T300RS that will let you mount an Elgato Stream Deck. It's a great way to add buttons quickly to your sim racing setup without spending a fortune.

It should be compatible with both the Mk1 and Mk2 Stream Decks. I have also included the STEP files for you to customize for your liking too.

You can print the right-hand mount, left-hand mount, or both-sides mount. An OEM replacement blank is also included.

This uses your original Thrustmaster T300RS screws for the wheel cover. Print and use at your own risk.

Printing Instructions

• Print the steering wheel base cover concave side up.
• Print the Stream Deck mount laying down, with the front facing upwards.

Installation Instructions

1. Remove your steering wheel from the base.
2. Remove the four screw securing the steering wheel interface cover from the base.
3. Attach the steering wheel interface cover you printed, but don't attach it just yet.
4. Attach the appropriate mounts for your Stream Deck onto the cover, whether you anted left-hand, right-hand, or both.
5. Replace all four screws you removed.