D-Sub 25 pin to cable chain adapter

I need this adapter for a bigger project which I will publish on Thingiverse.
I also uploaded the Sketchup file (adapter_dsub-chain.skp) so you can customize yourself.

1. for D-Sub 25-Pin; use 2 screws (ideal: M2,5x16mm; max.: M3 & 20mm long)
2. print cable chain, version 3, from: http://www.thingiverse.com/thing:644420/#files
   (example: chain_segment_ver.3_x4.STL) - inside dimensions: 12.0 x 10.8 mm

I used 18x 0,4mm² cables.

Print Settings

Rafts: 

Doesn't Matter

Supports:

No

Resolution: 

0,2mm

Infill:

25%

Notes: 

no support for the "withSupport"-version required! use at least 25% infill!

Post-Printing

1. remove the support with a comb pliers.
2. then use a long nose pliers to break out the last remains
3. the hole should be residue-free