March 12, 2025
Description
Specifically designed to fit Sunstone Orion Pulse Arc Welder microscope. Use main camera only, 2x zoom to limit vignette. Phone should fit very snug with minimal play, use 2-3 piece of electrical tape on the inside top edge tighten phone in if needed.
Printing Recommendations:
PLA
Print phone case portion vertically upside down 0.4mm nozzle, 0.2mm layer height, 20% infill for the smoothest finish. Use organic supports on overhangs.
Attachment collar doesn't really matter, use a brim if needed. Glue into the case with sturdy glue, E6000 works great.
License:
Creative Commons — Attribution — Noncommercial
ClearMindCasting
