Case for W1209 + HLK-2M12

Temperature-controlled mains electricity. The W1209 + HLK-2M12 is in an all-in-one case. Only mains (120 or 230V) go in and out of the case.

You must pause the print before 8.4mm to drop the nuts in. Pause is set in 3MF file.

Bill of Materials

• 6 x M3x10 screw
• 4 x M3x16 screw
• 4 x M3 nut
• 2 x WAGO 221-413 splicing connector
• 1 x W1209 temperature control switch
• 1 x HLK-2M12 powermodule