PolyDryer Dessicant Tray and Lid

• IMPORTANT: add a print modifier to the bottom of the tray and set the Top shell layers and bottom shell layers to zero also add sparse infill denity to 25-30% to ensure proper ventilation for the tray. For reference see picture 7/7!

 This tray holds up to 300g of color changing silica beads in a small and compact desgine. It features a small groove where you can slide in a lid with a funnel. The funnel is 15mm by 15mm wide so you can easly use it with popular AMS dessicant holders and other dessicant holders. 

Simply take the included tube for smaller filament and slide it between the holes of the model and place it in the PolyDryer as pictured.

 Do note that you need to print it in a higher temp material depending on the heat settings you use on the PolyMaker Polydryer. It prints well in PETG and easly survives Heat setting number 3 on the PolyDryer. Drying time could take longer the more beads in the Tray. I do recommend steering the beads in the tray after a few hours of drying to ensure each bead gets dryed evenly.