Pokeball Futuristic

A more classic version of the pokeball can be found here:
https://www.printables.com/model/1061179-pokeball-classic 

My Futuristic Pokeball design inspired by the work done by NeoTendar and his beloved Pokemon Unlimited Project https://www.deviantart.com/neotendar/gallery/23953600/pkmn-unlimited-project , with his permission to try and recreate!

The pokeball can be fully printed, or, if you chose, you can use a metal 19mm Rugged Metal On/Off switch for the button and wire it up to glow! (I don't have any tutorial for it as I haven't done it myself)

To complete the hinge, you should be able to fit a piece of filament into the hinge system.
Both the top and bottom shell are the same, so you only need to dupe the shell file.
For magnets to keep it closed, I used magnets which are around W=4.5mm, L=9.5mm, H=1.5mm, so if you find any in that zone, all good!