January 23, 2025
Description
Hangar Christmas Ornaments
Best printed in Silk or Glitter filament at 0.10mm fine detail quality!
The part where you put a rope through is a bit off center so that the hangar leans a bit forward.
If you have issues with printing without supports, try slower print speeds on bridging.
Also, if you want to fill out the entire plate with small hangars, enable Brim.
Since it's cooler on the outside, the hangars sometimes tend to let go and slide.
The ring might be a bit fragile, so be careful when hanging it up!
Modeled in Blender3D
License:
Creative Commons — Public Domain
7
Robin Louwersheimer
