BlueRov T-slot mount

This might be useful if you're building a smaller ROV based on BlueRobotics parts. The front side slides on to 2020 aluminum t-slot, while the other side connects to BlueRobotics' 4" enclosure clamp, using 4 M4 screws.

As you can see in the photos, I am using these with 3d printed clamps, instead of the genuine article. The .stl file for the part is available at the link provided above.

Currently this is friction fit, and will likely need some manner of indexing screw to get a good firm connection that's not gonna slide around. My ROV is still in the “being built” phase, so I haven't decided how I'm gonna bolt these t-slot bars down yet (friction fit is good enough for sitting on a desk). 
I'm open to suggestions on this. 


Print settings:
I am told that if youre putting something deep underwater it's a good idea to print at as close to 100% infill as possible. Other than that, this print will likely need infill for the screw holes if you print it sideways (like I usually do).