Yeti tumbler handle/ 10 OZ

https://nd3dprint.etsy.com

This model is for the 10 OZ Yeti rambler cup/tumblers.

It fits a little snugly without adjusting anything but if you want, I'd suggest sizing it up by 1%-0.5%.

It takes a while to print but it's worth it.

I printed it at 

Nozzle temp: 220

bed temp: 50

Layer height: 0.12mm

Wall/shells: 4

Retraction speed:40mm

Retraction length:0.8mm

Infill: 25%

Infill type: gyroid

Bottom layers: 6

Top layers: 6

supports: organic

I found that if you have problems with the layers skipping/shifting print it in the orientation shown.

Do the bigger face of the handle facing down.