Delta-P duct for MK3S(+)

Delta-P Duct:

Improved internal airflow for better laminar flow across the nozzle tip

lengthened the duct tips by 5mm to better cover the part being printed below the nozzle.

lowered the duct base to get the airflow pointing below the nozzle tip instead of at the side of the heater block.

Delta P Extruder Cover:

Added Zip tie mounts to the back of the 5015 fan mount to retain the heater and Pinda probe wires.

Added channel below the stepper motor to allow the fan and thermistor wires to go across to the left side channel where the stepper and 4010 fan wires are contained. (optional)

If you like my designs, please consider supporting me on Patreon: https://www.patreon.com/MediaMan3D