Side Grip for a Minolta SRT 101

This is a side grip for a Minolta SRT 101. I've found that holding older film cameras is somewhat uncomfortable because many of them do not have a side grip, so I decided to make my own. The positioning of the holes will vary based on the camera, but I'm positive it is quite easy to modify to suit your camera.

• Printer brand:

Prusa

• Printer:

Mk2.5s

• Rafts:

No

• Supports:

Yes

• Resolution:

0.15

• Infill:

35

• Filament brand:

Hatchbox

• Filament material:

PETG

• Notes:

I used 4-5 perimeters with good results. You can get away with using PLA (my first drafts were out of PLA), but there is a decent amount of flex, which is why I switched to PETG.