Ubiquiti UniFi U6+ Stand - (U6-Plus - U6-Lite - AC-Lite)

Hello Everyone

I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of 12.5 degrees. On the bottom there are places for 4 non-slip silicone pad with a diameter of 5-6 mm and a height of 1.5-2 mm - this is an additional option that you do not have to use.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.

 

How to Print ? :

• Material : ANY
• Layer Height : V1 - 0.2mm 
• Layer Height : V2 - Due to the curvature of the model, the recommended layer height is 0.1mm 
• Infill : 10-20%
• Wall Loops : 3
• Bottom Layers : 4
• Top Layers : 4
• Seam Position : Back
• Support : No
• Brim : No