GOTHIC LANTERN WITH LED LIGHT AND CHAIN

Taking the things

GOTHIC LANTERN https://www.thingiverse.com/thing:2395716

and

CHAIN GENERATOR https://www.thingiverse.com/thing:28405

I built a complete lamp, by adding a new thing for base and leds light, that is connected to 220Vac with no transformer. Rotate the piece before print it.

The Leds light has a small power supply board and four leds board.

The power supply board has only six components.

The leds board has four leds and two jumpers, all mounted oncopper side. You will need four leds board. Each one is connected to the next one in serial mode, in order to get 16 leds serial mode.

I enclose the schematic and boards, in order you can make your complete lamp

IMPORTANT: The new part called BASE_BASE_CAM al 80%.STL is scaled to the 80% to the other files you will have to print (Ghothic lantern and Chain). So, you will have to scale to 80% all the files EXCEPT this one, that is already scaled. The power supply board will fit on it. If you scale to 80% the other parts, all will fit into 200x200mm bed size Remember do not scale BASE_BASE_CAM al 80%.STL. It is already scaled,

BASE_BASE_CAM al 80%.STL will be joined to the lamp by three small screws

Enjoy it!

Print Settings

Printer Brand:

Prusa

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.3mm

Infill:

**Filament:** DOES NOT MATER PLA BLACK

Category: Decor