Blinds Shutter bracket Venetian clip no drill

I bought a few venetian blinds for my windows and some of them didn't have the “no-drill” brackets to install them, so ended up printing one.

It works for almost every type of blinds/shutter and has been tested with length of 1.5m and a width of 0.8m. In case it snaps, please let me know in the comments, I'll create a beafy version of it.

The rail's width is also generic, in case you have a wider width and has no experience working with Fusion360, write your width in the comments and I'll upload the adjusted version for you.

This bracket doesn't snap, just make sure you don't pull the shutter downwards with force.

Print suggestions:

• Infill: 10%
• Support: None.
• Nozzle head: 0.4 is optimal.

How-to:

1. Print the model.
2. Insert it into the end beside the metal rod (that rotates) of the blinds.
3. Push the clip gently until it locks.
4. Clip it into the sealing of the window and push gently to lock it in.

Available formats:

• Print profile
• STL exported models
• Original design in Fusion360 environment

Remixes, Editing and publishing:

• You're allowed to download, print and modify the exported models based on your needs.
• You're allowed to modify the original design and implement your own modifications.
• You're allowed to publish the new modifications in the form of a remix or a new model.

I support the open sourcing of original designs and encourage the contribution in such way. Please do credit me when using the design for your base, or remixing when not referencing this model.