Desiccant Container Ying Yang

A 38mm wide stackable spool shaped containers for storing desiccant with hydrometer insert.

The circular spool can split apart into two halves, each holding approximately 0.36 Liters of desiccant.  Can partially fill if full volume is not needed.  

Four sections can be stacked and fit into a filament dryer to recharge desiccant on a periodic basis when needed.  It may take two days to dry out four containers of filament from 50% RH to < 20% at 55°C.  

The container is secured with 4x M3 12mm socket head screws threaded into plastic parts. 

Printed in PETG, with hexagonal openings introduced with the slicer by setting top and bottom layers to zero with 30% Honeycomb infill. Perimeters to 4. 

For the supports needed on the lid for hydrometer use: Style: Organic, Top Contact Distance: 0.3mm, Pattern spacing: 1.1mm, XY separation: 100%.