ARIANE 6

Description

     The Ariane 6 model is a highly detailed 1:200 scale reproduction of the new ESA rocket assembled by ArianeGroup. The model consists of several pieces printed separately, which are easy to print and assemble.

     The finished model dimensions are approximately between 28 and 32cm high and 8cm wide.

Printing

• There are between 25 and 37 pieces to print, the total printing time for the entire model is approximately 7h30 hours.

Choosing your configuration kit.

    There are multiple configuration kits available for this model, depending on your printing and assembly preferences. (The download files contain what is needed for each configuration.)

     We offer 2 assembly configurations: 

Kit Ariane 62

• ESR A62
• LLPM A62
• ULPM
• A62_Short_Fairing_White_x1 (In the fairing folder)
• STAND A62
• NAMEPLATE A62 (Multi Parts)
• NAMEPLATE A6 (Multi Parts)
• NAMEPLATE A62 (Multi Color) (In the Plate Multicolor folder)
• NAMEPLATE A6 (Multi Color) (In the Plate Multicolor folder)

Kit Ariane 64

• ESR A64
• LLPM A64
• ULPM
• A64_Long_Fairing_White_x1 (In the fairing folder)
• STAND A64
• NAMEPLATE A64 (Multi Parts)
• NAMEPLATE A6 (Multi Parts)
• NAMEPLATE A64 (Multi Color) (In the Plate Multicolor folder)
• NAMEPLATE A6 (Multi Color) (In the Plate Multicolor folder)

Assembly and Printing Guide

• As this model doesn't have many parts, I haven't made an assembly guide. If I have any requests, I'll make one.

Tips

Settings

• For some parts the supports will be necessary, see the assembly guide and impressions.
• For the base, it is recommended to print with 3 perimeters to avoid visible infill.
• If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit. 

Printing

• For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly. 
• Follow the printing guide published on Instructables.

Post Printing

• You may need to sand the junction areas between the parts for a smoother finish.
•  Additionally, I recommend using glue for better strength and durability.
• Follow the assembly guide published on Instructables.

Technical names

• A62 : Ariane 62 , version with 2 boosters
• A64 : Ariane 64 , version with 4 boosters
• ESR : Abbreviation for Equipped Solid Rocket, les boosters 
• LLPM : Abbreviation for Lower Liquid Propulsion Module, the first stage.
• ULPM : Abbreviation for Upper Liquid Propulsion Module, the second stage
• Interstage : the interstage is a module that joins the second stage to the first. 
• Vulcain :  Ariane 6 first stage engine