Servo mounting helper (2x M3)

Servo mounting helper (2x M3)

You need to mount a standard servo to some (thin) bracket, sheet metal or a piece of metal/wood? Then this is a small print that will save you a lot of fumbling!

Once both screws are in by a turn or two, you don't need any second tool (to hold the nuts) to tighten the screws as the nuts can not rotate freely anymore.

This should fit most of the standard 40x20mm servos like DS3235SG. If not: open the FreeCAD file and modify as you like!

Is this thing useful to you?

Don't hesitate to hit the ❤ and show some love. I'm always happy to hear from you in the 🗩 comment section. If you have problems printing my files: tell me in the comment section too!

Provided files

I do like to have real CAD-files, when downloading things from others. Most users don't provide files other than .STL-files. These are useless for further manipulation or quick changes. So I'll provide the following files to you:

Updates

• 2021-12-27 first upload. Files: V0

Is it easy to build/assemble?

Yes. Just press in two standard M3 nuts (DIN 934)

Is this thing finished?

Yes.

Print Settings

Here are some general guidelines on how to print this thing.

Rafts: Not necessary

Supports: Not necessary

Resolution: 0.2

Infill: 100%

Filament: PLA, PETG, ABS, ASA, …

Notes:

Post-Printing

none

Assembly

Just insert M3 nuts.