Small Cell Phone Stand (originally for Pixel 6a or 7a w/ 2mil slim case)

I had let my partner take my adjustable stand as they need it more than I do, however I needed something to throw my phone on.  

• I made a cutout so you can use the swipe motion from the bottom of the phone.  
• I do not use the charger passthrough, however I included the hole for one just in case.  You will have to make your own “plug” to keep a USB in place if you want it permanent. 
• I made holes for the speakers on the bottom of the phone.  
• I included 12x1mm indents for the little 10mm rubber feet (like from Amazon here:  https://www.amazon.com/TCPENG%C2%AE-Adhesive-Non-Slip-Stoppers-Furniture/dp/B0BLN4TCPT/ref=sr_1_4?s=hi&sr=1-4

Print it on its side with no supports.  You should be able to bridge the tiny spaces where the cutouts for the speakers and charger port are.  If you need it, though… print supports.  :D

*** NOTE:  Added version with wider cutout for button usage (in accessibility settings)

*** NOTE 2/14/2025:  Added version with revised height and support, with wider center cutout to accommodate more chargers.  Only going to update wider cutout now.