November 10, 2024
Description
Calipers holder for common vernier and digital 150mm / 6" calipers.
Fits most calipers with a body width of up to 38mm (approx. 1½ inches.)
Can be printed lying flat without any support without trouble.
Can also be printed upright with proper bed adhesion (might need to rotate it by 90° on bed slingers so that the long strip is parallel to the slinging axis. Or just enable brim).
Layer height of 0.2mm or higher is advised for better looking overhangs.
Original Onshape document can be found here: Calipers holder
License:
Creative Commons — Attribution — Noncommercial
9
halfbit
