Marching Lyre Phone Clamp

Recommended Settings (See sliced file):

• Material: PETG (PLA may soften if used outdoors)
• Brim: 5mm
• Special settings for sliding clamp: 3 perimeters, 6 top and bottom solid layers

Assembly Instructions:

V1: Run a ¼-20 or M6 tap through the hole in the clamp. Slide the clamp onto the rail of the main body, and insert a screw at least 5/8" or 14mm long to secure the clamp in place.

V2: Loop a rubber band through each hole on the main body, and hook the ends on the sliding clamp