Car iPhone 12 Pro Max Ikea wireless charger

I needed a hassle-free charger to my car(s) when I got a new phone.

It's meant to fit iPhone Pro 12 Max with cover - the phone seat area is optimized to body size 82x12mm.

If you don't use any cover on your phone it is going to be loose.

As the wireless charging is just so convenient, I went for Ikea LIVBOJ as the most easy to get way of charging. You will also need type A to type C cable and a lighter-socket USB converter.

I've made three (so far) version of clips going into the air ducts but they are easily re-mixable to fit your needs.

You will connect the two pieces together by four M3x10 screws (the same which comes with MK3S).

List of material:

• a filament - I prefer PETG for better heat and impact resistance
• 4 x M3x10 screws
• 1 x Ikea LIVBOJ
• 1 x Car lighter to USB converter
• 1 x USB A to USB C power cable

I urge you to set at least 3 perimeters for the clip as there can be strong forces when the car is moving. The rest of the settings is pretty standard on PrusaSlicer 0.2 quality profile.