Duet 3 6hc and SBC mounting bracket

This is a slim mounting bracket for a Duet 3 6hc board in combination with a Raspberry Pi 4B or any other SBC for that matter which has the same mounting hole dimensions. There are two versions. The standard Version and one with a little more narrow borehole pattern for mounting. The Bracket is meant to be used with heat set inserts. You need:

• 8 pieces of heat set inserts M4x8.1 mm (or similanr length)
• 4 pieces of heat set inserts M2.5x4 mm (or similar length)

There are also four washers that must be printed to create enough clearance between the mounting bracket and the duet 3 board.

Printing is easy, just make sure you print it the right way up. PETG worked perfectly for me here. PETG V0 would be an even better match.