Raspberry Pi Zero NES case with functioning power LED, print in place buttons

Necessary hardware:

• Raspberry Pi Zero 2 W: https://www.amazon.de/-/en/gp/product/B09KLVX4RT/
• USB hat: https://www.amazon.de/-/en/gp/product/B09B9Y17MV/
• Optional heatsink: https://www.amazon.de/-/en/gp/product/B0B4JQQ8ND/
• 1x M3x6 threaded insert
• 1x M3x12 countersunk screw
• 4x M2.5x6 countersunk screws
• Optional: Red LED with 3mm diameter + suitable resistor (for power LED)
• Optional: 2x 6x6x4mm push buttons (for power & reset buttons)
• Optional: RC wheel weights so stiff cables don't lift the console up: https://www.amazon.de/dp/B00IJFXMIA

Note that the OTG microUSB port is not usable with the USB hat connected, as such I didn't make it accessible through the case

I'm using Recalbox as OS, check out their tutorial on wiring/configuring power led & buttons: https://wiki.recalbox.com/en/tutorials/others/add-on-off-button-to-your-recalbox