AeroPress XL Coffee Maker Organizer Carrier with Scale and Coffee Compartments

For those who've been asking for an XL version to match their upgraded Aeropress - your wait is over!

Introducing the Aeropress XL Organizer & Carrier - the perfect companion to your brewing routine, designed by popular demand following the success of our original Aeropress carrier.

This all-in-one solution elegantly holds every component needed for crafting the perfect cup of coffee. Say goodbye to the office shuffle - no more awkward trips between your desk and break room juggling loose equipment. The thoughtfully designed carrier lets you transport your entire coffee setup with just a couple of fingers.

Best of all, it's fully compatible with the MK4 printer, making it accessible for home fabrication. 

You can fine the stand for the original version here: https://www.printables.com/model/1048568-aeropress-coffee-maker-organizer-carrier-with-scal

Please Read!

This model is designed to maximize the build volume of the Prusa I3 (MK2/MK3/MK4). The model dimensions (with scale compartment) are 210mm x 250mm x 210mm. While the printer can technically handle these dimensions, the slicer may show warnings. The simple solution is to set the scale factor to 99.9%, which resolves any slicing issues.

I printed mine on the MK4S using the "0.20mm Structural" setting with PLA. The print takes approximately 29 hours to complete, with organic supports added for the overhangs.

When you load the STL file, it's already oriented correctly for printing - simply add supports and you're ready to go. If you're also using an MK4S with PLA, you can use my pre-sliced gcode file directly.

The package includes 2 files:
- AeroPress XL Coffee Maker Organizer STL
- AeroPress XL Coffee Maker Organizer GCODE

The scale compartment measures 200mm x 150mm x 20mm. I've used this scale model for four years with great results. If you'd like to get one, here's a link (affiliate link - thank you for your support).
https://amzn.to/3BTEzfT