November 18, 2024
Description
I printed this in Draft with 4 walls with a 0.8 nozzle with PETG that really needed drying and it is really strong. The default print is 10mm tall, if you flip it over and print it 8mm into the bed you get a nice front plate to sandwich the coro between but this is optional.
I used 4 3.6mm cable ties. You will need to drill 4 extra holes, use a 4mm drill bit.
https://buildalightshow.com/gilbert-engineering-props/228-4ft-arch-single-row-10mm-coro-black.html
License:
Creative Commons — Attribution — Noncommercial
8
Matt
