December 28, 2021
Description
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist.
These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5 & 6 gears.
They quickly & easily slide into the unused gear slots, physically making the th8a shifter a 4, 5 or 6 speed shifter without the need to buy/change the whole shifter plate.
This is great for when you are switching cars a lot in game.
I have put a file to print a set of 3 in the upright position.
they are a pretty quick print & nicer to print upright.
Also I have included the individual files.
Printed in PLA, these parts should be a nice tight/snug fit on the th8a.
7th gear is a slightly different design & fit to the other 2, which should fit in any of the other slots.
Any problems just write in the comments.
Enjoy & if you found this useful, it would be great if you could give it some feedback, a like or even post a make ;-)
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.20
Infill:
20%
Notes:
Parts will be plenty strong enough in PLA.
If you print in other plastics with different characteristics, slight adjustment to size may be required as i found printing in abs, parts were a bit looser fit in the shifter
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Virtualmisterl
