WLED OBO box holder

I wanted some LED's outside wired with WLED controller so I needed a case. Had a OBO case laying around so decided to use that. 

This is for a 55x137x32mm power brick, it fits in a OBO T250 case and I use a NodeMCU Amica board with a Stepdown module and a level shifter pcb. I used a barrel connector so I do not have to cut off the connector of the PSU.

Print two of  the Cable-inlet-230.3mf to guide the power wire thru one of the big holes.

Step files includes for if you like to adjust some things.