November 17, 2024
Description
The Sunlu Filament FC01 joiner, is an excellent product, but doesn't suport curled or spring like filament that will not stay flat. So this jig, helps to align and keep the filament straight, so that a perfect join can be obtained every use.
Use double sided tape to stick down the sunlu unit onto the base unit as shown in the photo, and ensure you align ther filament as you do.
use 8 x 6mm by 6mm cylinder magnets, press fitted into the holes to hold the filament at the sides.
follow the instructions Sunlu states and you should get perfect joins every time.
Good luck and happy printing with all those short bits of filamnet.
License:
Creative Commons — Public Domain
7
FangDoc
