Phone charging station - Monkey Bars DIY

This is a real playground for your phone and/or headphones! To print it, you need five 18cm/7,1" beds. As you can tell - it's a lot of printing, but just look at the result! How fun!

My recommendations for top quality settings (18cm bed, 0,4mm nozzle):

pillars   -   0.15mm layer, 20% infill, auto tree supports (30°)

rungs   -   0.14mm layer, 30% infill, auto tree supports (30°)

rung 3   -   0.14mm layer, 30% infill, auto tree supports (30°)

monkey bars   -   0.1mm layer, 30% infill, auto tree supports (30°)

other parts   -   0.1mm layer, 30% infill, auto tree supports (30°)

These are my recommendations for the highest quality prints (A1 mini). 

Remember, use your own settings if you find them better. You may need to adjust some parts by moving them back and forth a few times or using a hot needle, knife or scissors to cut off excess plastic (parental control recommended), these methods have been tested on parts printed with PETG HF. The model passed my print test - I made sure that all the key parts work well together. However, if possible, please confirm that everything fits perfectly before you print the final piece. Happy printing!