DPS/WEL DIN rail case

DIN rail mount case for DPS/RK power supply or WEL electronic load modules.

Uses 12mm openings for

• button,
• safety 4mm lab sockets and 
• power input (e.g. my panel mount USB-C PD trigger holder)

The back attaches via M3x8 counter sink screws into threaded inserts and has an opening for the fan on the WEL3005 module. The openings for the threaded inserts are 4.1mm so it should work with the common heat set inserts but I happened to use these ones, which work quite well.

The DPS5005 in the side-by-side picture is running the OpenDPS firmware.