iMac G4 Neck / Arm Opening Tool

While there are a number of tools and methods posted online on how to open this, I didn't have easy access to any of them so I designed a simple tool.   This acts as a screwdriver handle for three 4mm hex bits (such as what come from an iFixIt Kit)

Find three bits that fit well enough into the pinholes on the screw, and insert them into the handle.  Small Hex, Torx or flat bits will work.  You may need to print two tools to hold from the rear (the screws spin), but I was able to hold the rear side just with my thumb.

• Printed on Bambu P1S - PLA - 0.4mm nozzle, 0.28mm layer height, 15% infill. 
• Tolerances on the slots are a bit snug, but any dialed in printer should work.