VzBoT 235 - Removable TOP HAT

VZBOT 235 - Removable Top Hat for original cover

Since there is very little space for the bowden and cooling pipes at the top
we were looking for a solution for a small overhang of the top cover.
A few nice solutions already exist in various forms, but they are all quite massive and either interfere with the frame (internally thread in the corner that we don't have), or there are other holes in the existing equipment.

All that was left was to develop a simple top hat that just sits on the existing magnets
and the top of the cover on another magnets in the middle piece.
The magnets hold everything together so that the cylinder can be removed
and everything can be returned to its original state within a few seconds,
see photo.

Important, print from ASA or ABS, the models are recalculated for the shrinkage of the given materials.

Required screws and material:
16x M3x6 BHCS or SHCS
8x M3x8 BHCS or SHCS
16x heat inserts M3xD5xL4
8x Magnet 8x2mm

Print from ABS, ASA, PC or PA (CF)