Lazy Susan Top - Tall

This is a top for @logicalplanet ‘s model ( https://www.printables.com/model/777889-lazy-susan-mechanism-20-conical-bearings ) that I created for elevating objects for 3d scanning.

The bottom of each of the three legs has space for a 3mmx5mmx4mm heat set threaded insert.  You'll also need 3 x 3mm screws (I used hex socket cap).

The legs are about 6inches (152.4mm) tall.  They should be strong enough to support light objects if you print them with 4 walls, 3 top layers, 3 bottom layers, and 15% gyroid infill.

I happened to print mine out of Bambu Lab PETG-HF in black, with a 0.4mm nozzle and 0.2mm layer height.

Note that this is only the part in the pictures that is black in color.  Nothing else is included here. :)